Saito FA-120 Special Instruction Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 14
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
FG-36 PARTS LIST 19
SAITO FG-36 PARTS LIST
# deScRIPTIOn QTy # deScRIPTIOn QTy
01 Cylinder (left) 1 42 Rocker arm screw and nut (42-1,42-2) 2ea
06 Piston 1 43 Rocker arm pin 2
07 Piston pin 1 44 Rocker arm bracket (left) 1
08 Piston pin retainar 2 45 Rocker arm bracket (right) 1
09 Piston ring 1 46 Valve (in and out) (46-1, 46-2) 2
10 Connecting rod 1 47 Valve spring+Keeper+Retainer (47-1,47-2,48) 2ea
14 Cylinder screw set (14-1, 14-2, 14-3, 14-4) 1set 48 Valve retainer (Cotter) 4
15 Crankcase 1 49 Rocker arm cover 2
17 Rear cover 1 69 Intake manifold 1
19 Breather nipple 1 74 Muffler 1
20A Front bearing 1 75 Muffler manifold (75-1, 80) 1
22 Rear bearing 1 80 Muffler nut 2
23 Crankshaft 1 82-1 Carburetor complete 1set
27A Taper collet and drive flange (27-1, 27-2) 1ea
83-1
Carburetor body assembly
1set
28 Prop washer and nut (28-1,28-2) 1ea 82-1-1, 82-1-2, 82-1-3, 82-1-4, 82-1-5
31 Crankcase screw set (31-1, 31-2, 31-3) 1set
90
Carburetor screw and spring set
1set
32 Engine gasket set (32-1, 32-2, 32-3, 32-4) 1set 82-1-9, 82-1-10, 82-1-11, 82-1-12
33 Cam gear housing 1 91 Carburetor gasket set (82-1-6, 82-1-7, 82-1-8) 1set
35 Cam gear 1 93 Intake velocity stack 1
36A Cam gear shaft 1 95 Engine mount set (95-1, 95-2, 95-3, 95-4, 95-5) 1set
37 Steel and washer set (37-1, 37-2) 1set 110 Anti loosening nut 1
38 Tappet 2 149 Oil slinger 1
39 Pushrod 2 152 Screw-pin (for drive flange setting) 1
40 Pushrod cover and rubber seal (40-1, 40-2, 40-3) 2ea 153 Electronic ignition system
1set
41 Rocker arm 2 153-1, 153-2, 153-3, 153-4
OUTSIDE DIMENSIONS (mm)
SPECIFICATIONS
Disp: 36.3cc (2.20 cu in)
Bore: 38mm (1.49 in)
Stroke: 32mm (1.26 in)
Weight: (Engine only) 48.2 oz
(1252 g)
Weight: (Muffler only) 3.0 oz
(86 g)
Weight: (Engine Mount only) 9.6 oz
(270 g)
Weight: (Ignition only) 5.4 oz
(152 g)
Total weight with motor mount,
muffler and ignition system: 66.2 oz
(1760 g)
Crankshaft: M8x1.25
Cylinder: AAC
HP: 3.5 approximately
Fuel Efficiency: 30cc/minute
Propeller Size: Dia. 18–19 x Pitch
8–9; Dia. 20x Pitch 8
Benchmark Propeller: APC 18x6W @
8,300 rpm
RPM Range: 1,700–9,000 rpm
Fuel Consumption: Approximately
30cc/minute at full throttle and
approximately 7,500 rpm. Fuel
consumption will depend on the load
of the propeller. During actual flight,
fuel consumption increases slightly.
Electrical usage of ignition system:
Approximately 200mAh for 15
minutes.
Fuel: Gasoline-Oil mix of 20:1 (20:1
is recommended for break in and
continuous operation).
Oil: The use of only 100% synthetic
oil is such as our Evolution Oil
(EVOX1001Q)
18 FG-36 DIMENSIONS AND SPECIFICATIONS
14387 SAI FG_20andFG_36 Manual.indd 18-19 12/16/08 2:09:15 PM
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments